Send Inquiry x
I can help you
Send

Enameled Coated Magnet Wire

Current Position :HOME/Magnet Wire/Enameled Coated Magnet Wire

Enameled Coated Aluminum magnet wire
 
Class 130/155/180/200/220 enamelled coated Aluminum magnet wire
 
Performance comparison of enamelled wires : 
The space factors of magnet wires are compared in the right figure. The space factors of enamelled wires are superior to those of other wires for winding, as are their electrical properties. However, more careful examination must be made of the following properties as compared with other wires.
(1) Heat resistance
(2) Resistance to solvents, chemicals and varnishes
(3) Resistance to hydrolytic degradation
(4) Stability when combined with insulating materials
(5) Resistance to water and moisture
(6) Ease of use


Product Range :
* wire strip thickness a: 0.80--7.0mm;
* Wire strip width b: 2.0--16.0mm;
* Recommended width ratio of conductor: 1.4<b/a<8.0;
* Temperature Class(℃) : 180, 200, 220;
* Standard : IEC60317-0-2,IEC60317-29 MW36-A;
* Bobbin : 30/50kg wooden spool,plastic spool,we can customize the length according to *customer demand;
Special size can be made with discuss.


Material :
Drawing or extruding bare Aluminum magnet wire confirm to National Standard, smooth surface, no defects ;Good performance,Insulation varnish.

Specs of Enameled Coated Aluminum magnet wire : 
 

Type Polyesterimide Polyimide and polyimide
 mixed
Polyvinyl acetal Thermal bonding acetal
Temperature-resist grade 180 200 120(155) 120
Property High heat resistance, 
good chemical
 resistance, hydrolysis
 resistance
Excellent heat resistance,
 strong resistance to 
chemical solvents, good
 scratch resistance
Excellent resistance to 
transformer oil, good 
resistance to scratch, 
excellent flexibility and
 adhesion, and good 
water resistance.
In addition to all the performance
 with acetal, also can obtain good 
adhesion strength by the heating 
mode
Standard GB/T7095.4-2008, 
IEC60317-28
GB/T7095.6-2008,
 IEC60317-29
GB/T7095.2-2008, 
IEC60317-18
 
Testing 
Standard
GB/T4074, IEC60851-1-6

Product type :
* 130 grade Polyester Enameled Coated Aluminum magnet wire;
* 180 grade polyesterimide Enameled Coated Aluminum magnet wire;
* 200 grade Polyimide and polyimide mixed Enameled Coated Aluminum magnet wire;
* 120(155) grade polyvinyl acetal Enameled Coated Aluminum magnet wire;












Feature :
* High thermal class;
* High chemical stability;
* Good mechanical properties;
* High breakdown voltage, good formability;
 
Advantages :
* Excellent flexibility;
* Uniform coating, including at the corners, provides good insulation;
* Much more compact stacking for high space factor, compare to round enamelled wire;
【Comparative space factors】
 Round enamelled wire: Approximately 78%;
 Rectangular enamelled wire: Approximately 91%;

Application Of Enameled Coated Aluminum magnet wire :
Transformers, generators, refrigeration systems, class C generators, UPS power supplys, electronic transformers.




 

CONTACT US
Contact
联系我们
Looking Forward to Your Response!

Tel:037155689814

Phone:13673369503

Fax:+86-371-55686475

Mobile:13673369503

Skype:signialuminium

Email:frank@signialuminium.com

Address:A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan

[UP]